Quantcast
Channel: Xbox 360 Support
Viewing all 10107 articles
Browse latest View live
↧

RGH doesn’t glitch and boot anymore?

June 15, 2018, 3:07 pm
$
0
0
So it’s been working perfectly with boot times around 8 seconds (not the best but I don’t mind that time) but suddenly it doesn’t want to glitch and boot up.

I’ve been using everyday online for about 8 days.

Xell works if I hit eject though.

All I did before it happened was move mw3 iso files to the rgh, clicked the X home button on controller and it just froze... with stuff in background of aurora still moving around the screen?
↧
Search

Need a system reballed, JTAGGED System Dashboard 6690 Xenon Error 0020

June 15, 2018, 6:56 pm
$
0
0
If anyone on here still does reball services, point me in the right direction, need a diagnosis on the system and possibly a reball. Thanks you guys.
↧
↧

Trinity RGH Xbox 360 slim

June 16, 2018, 1:10 pm
$
0
0
Hello, this is my first post so I might not be the best BUT I’ve started a project trying to rgh a trinity motherboard with an ace v3 glitch chip and an lpt connector (for reading nand and other tasks that require computer connection). For some reason when I try to create my nand dumps, my Xbox cannot be found in jrunner or using nandpro30 through command prompt. I’ve checked the soldering multiple times and it’s not the best but I don’t believe that’s the problem as I’ve checked for shorts...

Trinity RGH Xbox 360 slim
↧

Flashing Phat Drive 79 - 2018

June 16, 2018, 3:37 pm
$
0
0
hey guys,

I’m trying to flash my Hitachi 79 through a VIA Sata card.

Not working too well because of drivers.

Any recommendations on what I should be doing? My drive is not getting recognized by my PC.....
↧

Maximus sd tool not asking to format when hooked up.

June 17, 2018, 7:11 am
$
0
0
Am I missing something? My soldering is almost perfect. But whenever I plug in the maximus sd tool, windows never tells me the drive needs to be formatted to use. Soldering is almost perfect. I will take a picture and show you guys. I've jumped the E$2 point on the sd tool. I've ran a wire from the crystal to pin 15 on the pin headers. The drive even shows under my computer as drive F: but, j-runner says failed to get disk geometry whenever I try to read it. I have power going to the board,...

Maximus sd tool not asking to format when hooked up.
↧
↧

Corona V2 4GB CR4 Muffin Install using Matrix Glitcher can't boot Xell

June 17, 2018, 12:31 pm
$
0
0
Hi,

Having problem with a Corona V2 4GB CR4 Muffion installation, wondering what could be the problem?
It seems the board is doing the glitching (the glitch sound and short/long pattern), but tried all the timing files under Corona/192/48, 1-1 to 4-2, it just won't boot xell at all.



The NAND info
[​IMG]

The chip
[​IMG]
DB2G3...

Corona V2 4GB CR4 Muffin Install using Matrix Glitcher can't boot Xell
↧

What do I need to buy for modding my console

June 17, 2018, 1:50 pm
$
0
0
Hey iIhave a opus console on dash 17526 so I am wondering what I would need to buy to mod this console if have
↧

RGH help

June 17, 2018, 5:42 pm
$
0
0
okay so im having poblems with mw2 on my rgh, ive installed the game and launched the default.xex and it comes up with an update, it wont allow me to update so i did it manually by downloading the files and placing them in the mw2 folder but then when i launch the game it comes up with 'fatal crash intercepted' and then crashes and i have no idea why, can someone please help.
↧
Search

Should I get another RGH?

June 17, 2018, 8:57 pm
$
0
0
Been thinking about getting another rgh for awhile now, i loved just playing with different mods in games, being online didn't really matter to me i only did it every now and then. They're so cheap i almost might as well do it...opinions?
↧
↧

RGH 360 troubleshooting

June 18, 2018, 1:05 am
$
0
0
What up sinners!? So I just bought a RGH 360. I have a KV but I’d like to get to know how to navigate and use menus before hosting. I’m plugging in jiggy 4.5 into my dash launch I save settings to HDD and reboot console. Once Starting up dash launch after the reboot and trying to launch GTA I’m getting a “FATAL CRASH INTERCEPTED” message. Anyone know why I’m getting this massage? Any suggestions help feel free to ask any questions thanks guys!
↧

Xell error "packet send error and no answer from server"

June 18, 2018, 5:31 am
$
0
0
I was trying to install mupen64 but I get stuck on Xell on the message "TFTP: packet send error" and "no answer from server" Any ideas how to solve this? I have a rgh... thx for reading.
↧

How would one disable the custom UI that stealth servers seem to impose upon users?

June 18, 2018, 7:43 am
$
0
0
How would one disable the custom UI that many stealth servers seem to impose upon users?
↧

Can you connect a jtagged xbox to the internet without getting banned?

June 18, 2018, 2:01 pm
$
0
0
Sooo...I've been aware that you can actually connect a jtagged xbox to the internet,however,when I modded my original device a couple of years ago I was told that if you connect the device to the internet you'd get banned, causing the device's screen to black out and never turn on again unless you...em..pay a lot of money to recover it as I recall.I've looked online about this and I've seen many people connecting it normally which made me a bit hesitated about connecting it or not, although...

Can you connect a jtagged xbox to the internet without getting banned?
↧
↧

RGH Wont Boot

June 18, 2018, 2:11 pm
$
0
0
I went to update my dash after not being on for a bit and I dumped my nand and everything and updated it. after it updated my xbox wont boot. I've tried reflashing my old nand and it wont work and im stuck on what to do next. Can someone help me out please?
↧

Help!

June 18, 2018, 11:51 pm
$
0
0
My Xbox 360 slim, now has a red dot blinking when I turned it on. It began as a ventilation error (maybe it was hot, maybe it wasn't) regardless I gave it awhile too cool, and tried again. It now just blinks red and upon start up. Not The HDD! And the power brick is green (good). Help.
↧
Search

Need help and confirmation in regards to RGH'ing an Xbox 360 S.

June 19, 2018, 4:42 am
$
0
0
Hi All!.

I recently got an Xbox 360 Slim for a bargain!.
A good 4-5 years back I had a RGH Xbox 360 Phat that I bought pre-modded and I loved it. So my idea was to RGH this one the same way and give it a shot as i'm pretty good a soldering iron.
After doing A LOT of research and taking the Xbox apart, I've figured out that i have a 250GB Drive, Corona motherboard with 16MB Nand and "Post-Out" missing.
I still havn't understood if I actually have a "V3" or "V5"... Regardless.. I need to...

Need help and confirmation in regards to RGH'ing an Xbox 360 S.
↧

Xbox 360 Neighborhood problem!

June 19, 2018, 6:32 am
$
0
0
Okay, so I’m having major issues installing Xbox 360 neighborhood onto my desktop.

I’ve successfully downloaded 3 different versions of the SDK installer and every time I run the installer, it oddly works perfectly fine. However, it doesn’t want to install neighborhood ANYWHERE. I’ve already tried running it in different versions, tried looking for it in explorer, Cortana, .reg files, etc... Almost everything you can think of and I don’t have an extra computer to work with here. Please...

Xbox 360 Neighborhood problem!
↧
↧

New to Xbox 360 modding

June 19, 2018, 7:39 am
$
0
0
hey guys ive just picked up an rgh and got it fully setup online, I’d appreciate some help with a few errors I’ve encountered so far and some queries I have. Please get in touch, cheers!
↧

XUID Grabbers Not Working

June 19, 2018, 12:14 pm
$
0
0
Since the latest dash update, it seems that tools that use XUID are no longer working. Does anyone have a working XUID grabber as of June 2018?
↧

Xbox 360 Corona V3 Muffin install ,beeping sound?

June 19, 2018, 1:15 pm
$
0
0
So I have done the muffin install but it just beeps, it has ecc written, and my postfix has a reading of 66 on 200k. All other points have continuity.There are no traces for post, however when I remove adapter the blue light comes on the matrix chip, a solid blue light. But when i disconnect power reconnect and test with multimeter it shows its connected at 66@200k. I have removed the nand headers for the time being until I can fix this problem. Here are pics of my install, its pretty solid....

Xbox 360 Corona V3 Muffin install ,beeping sound?
↧
Viewing all 10107 articles
Browse latest View live
Search