Trinity RGH Xbox 360 slim

June 10, 2018, 4:38 pm

≫ Next: [C++] How to get XUID from a string

≪ Previous: Using Hitachi DL10N rev 0502 to rip DVD's

$

0

0

Hello, this is my first post so I might not be the best BUT I’ve started a project trying to rgh a trinity motherboard with an ace v3 glitch chip and an lpt connector (for reading nand and other tasks that require computer connection). For some reason when I try to create my nand dumps, my Xbox cannot be found in jrunner or using nandpro30 through command prompt. I’ve checked the soldering multiple times and it’s not the best but I don’t believe that’s the problem as I’ve checked for shorts...

Trinity RGH Xbox 360 slim

---

[C++] How to get XUID from a string

June 10, 2018, 11:18 pm

≫ Next: RGH Jasper freezing troubles

≪ Previous: Trinity RGH Xbox 360 slim

$

0

0

How to generate a xuid from string in C++ plugin? thanks

RGH Jasper freezing troubles

June 11, 2018, 3:58 am

≫ Next: x360ace

≪ Previous: [C++] How to get XUID from a string

$

0

0

My Rgh jasper has been freezing since purchase and, it only freezes on large games like Gta and when i for example spawn a bunch of stuff in Bo2 or give people co host. I have taken it apart once to see if the wires were running near a bad spot or were running under the X clamp, the wires are running in a safe path but i still have freezing problems. I have not gotten an RROD yet some say its "Pre RROD"and i was wondering if anyone has had this problem. Before people ask here is a list of...

RGH Jasper freezing troubles

x360ace

June 11, 2018, 11:01 am

≫ Next: XB360 Won't Boot After RGHing (Trinity)

≪ Previous: RGH Jasper freezing troubles

$

0

0

does chips like x360ace must have timing files because i didnt receive programming cable with my nand Zzz.
so now i cant boot console only shows red lights

XB360 Won't Boot After RGHing (Trinity)

June 11, 2018, 7:27 pm

≫ Next: Hi,I wanto to make a jtag console. How do I write xell-reloaded with mtx spi nand flasher? J-Runner

≪ Previous: x360ace

$

0

0

I just now finished rghing my personal console which is a Trinity. I used the JRP v2 to read/write the nand and I used the ACE v3 to glitch. Once trying to boot into Xell, I checked my monitor. No input at all, not even a black screen! I haven't done anything to it except switch some timing files in case with waiting 30 mins each. When I turn it on the ACE only shows red blinking which I believe means the nand is corrupted. I really don't want to pay & send in my console. I will try to...

XB360 Won't Boot After RGHing (Trinity)

Hi,I wanto to make a jtag console. How do I write xell-reloaded with mtx spi nand flasher? J-Runner

June 13, 2018, 5:34 am

≫ Next: Falcon create ECC

≪ Previous: XB360 Won't Boot After RGHing (Trinity)

$

0

0

Hi,I wanto to make a jtag console.

How do I write xell-reloaded with mtx spi nand flasher?
J-Runner v5 dose not support to write mtx spi nand flasher.
Only read and creat...so I need to use nandpro but I don't know how to write with nandpro?

I tried that;
nandpro usb: -w16 xell-reloaded.bin
but didn't work.
(I mean it worked but maybe it wrote all nand with xell-reloaded.bin...so can not switch power on...so I rewirte orijinal nand again)

How do I do?
Thanks.

Falcon create ECC

June 13, 2018, 2:40 pm

≫ Next: New RGH user...

≪ Previous: Hi,I wanto to make a jtag console. How do I write xell-reloaded with mtx spi nand flasher? J-Runner

$

0

0

Hey,

Its normal or not?

Nands are the same
Glitch2 Selected
CR4 Selected
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.6
CB_A: 5761
CB_B: missing
CD (image): 5761
CD (decrypted): 8453
* this image will be valid *only* for: xenon
* patching SMC...
Patching Falcon version 1.6 SMC at offset 0x12A3
* zero-pairing...
* constructing new image...
* encrypting...

Falcon create ECC

New RGH user...

June 13, 2018, 2:55 pm

≫ Next: Corona V2 Media is 'write protected'

≪ Previous: Falcon create ECC

$

0

0

Hello fellow modders!
I've just recently RGH'd my first console. I put xex menu, and freestyle dash, as well as dashlaunch on there. I've gotten my hands on quite a few mod menus as well and feel like I understand how thet work and how to run them. I have a few questions that I'm hoping someone can answer. I'll list them in a numeric order so I don't have confusion to whats being answered.
1. I have a few menu files that are the default_mp.xex, do I need to have that game still ripped to...

New RGH user...

---

Corona V2 Media is 'write protected'

June 13, 2018, 3:04 pm

≫ Next: 360Ace V3 PHAT RGH2 wiring diagram?

≪ Previous: New RGH user...

$

0

0

Hi all,

So I attempted my first 4gb corona v2 rgh today. I used a homemade RW tool following this tutorial, which worked fine as I was able to get two good reads of the nand. Anyway, so I created the ECC and when I tried to write it back to the console I got the error 'Media is write protected' and then it failed.
Anyone have any ideas on whats causing this and how to solve it?

Thanks

360Ace V3 PHAT RGH2 wiring diagram?

June 13, 2018, 11:54 pm

≫ Next: Updating the Original Xbox Compatibility Lists

≪ Previous: Corona V2 Media is 'write protected'

$

0

0

I'm doing this on a zhyper, but with the S-RGH timing files Im hoping it will boot well.

Can anyone post the wiring diagram? Ive googled through 100 different guides and it seems all the links are broken (Not sure why no1 uses imgur, photo will last forever).


Aside from the standard 5 points I need to wire, what I understand is I need to solder an extra wire which will provide 1.8V to the ace. I need to know the point on the Motherboard to grab that voltage from and the point on the...

360Ace V3 PHAT RGH2 wiring diagram?

Updating the Original Xbox Compatibility Lists

June 14, 2018, 5:21 am

≫ Next: Anyone else having issues with XboxUnity?

≪ Previous: 360Ace V3 PHAT RGH2 wiring diagram?

$

0

0

So, there are a few versions of compat lists out there.

xb1-5829-nov-2007-hacked
and
xb1_13599_jul_2011-hacked

I used to have the 5829 version, but want to update to 13599. I copy over the files to /HddX/Compatibility

However when I start the game and press the Guide button it still says im using X.5829

How do I make it use 13599?

Anyone else having issues with XboxUnity?

June 14, 2018, 9:52 am

≫ Next: Xbox compatibility issue?

≪ Previous: Updating the Original Xbox Compatibility Lists

$

0

0

I signed up and everything... but it wont let me log in, I am new to this so if theres something I missed please let me know.

Xbox compatibility issue?

June 14, 2018, 10:30 am

≫ Next: Xbox XDK slim test kit boot screen freeze

≪ Previous: Anyone else having issues with XboxUnity?

$

0

0

So I put the compatibility files on my 360 (for xbox1) along with about 5 xbox1 games. Most of them work but one specifically called Spy Vs Spy doesn’t work.
The start up cut scene is good but soon as I get to the main menu screen the graphics just go all over the place like someone squeezed the whole menu screen down and turned it diagnol. It’s like the GPU has failed but it hasn’t as everything else works fine.

Thanks

Xbox XDK slim test kit boot screen freeze

June 14, 2018, 11:08 am

≫ Next: Using Hitachi DL10N rev 0502 to rip DVD's

≪ Previous: Xbox compatibility issue?

$

0

0

Hello there, this is how the story goes.
I bought an xbox xdk, why not, dirt cheap, it worked well, installed neighbourhood all that.
All was fine and dandy, etc. So i thought "Why not install a emulator!" cool right? Play some PS1 games, some Kojima stuff. "You're that ninja" style.
It was glitchy at first, it worked, played some test tetris thingy that came with the emulator. (lemme tell you i sent this thing via neighbourhood, used a guide from this site, dashlaunch didn't work, nor...

Xbox XDK slim test kit boot screen freeze

Using Hitachi DL10N rev 0502 to rip DVD's

June 14, 2018, 3:20 pm

≫ Next: Cant read disks after RGH install

≪ Previous: Xbox XDK slim test kit boot screen freeze

$

0

0

I have a bunch of games that I would like to back up to my drive in case the games get messed up. I looked on the readme of the xbox back up creator and saw hitachi DL10N and just ordered one. The one I got, however, is a newer version that I haven't been able to find any info on. I am not looking to use this in a game, I don't even have that version of xbox to use in. Just trying to get it to work as an external drive for ripping purposes. What do I need to do in order to rip games using...

Using Hitachi DL10N rev 0502 to rip DVD's

---

Cant read disks after RGH install

June 14, 2018, 3:27 pm

≫ Next: Matrix Glitcher V3 xsvf execution error code 01, half bricked?

≪ Previous: Using Hitachi DL10N rev 0502 to rip DVD's

$

0

0

Hi again,

So its a corona v2 (4gb) and when I try to read disks there is a short burst of the harddrive spinning up and then it stops. In addition to this, when I went to try and update the dashboard, I got the error 'Unable to decrypt KV! Eiher it's corrupt or the CPUkey you supplied is incorrect'. The cpu key is the one that I got from xell and so I don't believe it to be incorrect? I dont understand how the KV can be corrupted either since its a freshly rgh'ed console and it hasn't been...

Cant read disks after RGH install

Matrix Glitcher V3 xsvf execution error code 01, half bricked?

June 15, 2018, 3:04 am

≫ Next: Need help identifying caps.

≪ Previous: Cant read disks after RGH install

$

0

0

Well I think it's v3 with 48MHz on board quartz/oscillator, I shall use the XSVF_GUi tool to program it with
Muffin project
192MHz Corona muffin_3-1

But I accidentally clicked the
200MHz Corona muffin_3-1

Now it won't let me program the 192MHz section one anymore, it always
reported as xsvf execution error code 01
so has the chip bricked?

The programmer I use is the one modified from Matrix usb spi nand flasher.

I can still program any of the timing files under...

Matrix Glitcher V3 xsvf execution error code 01, half bricked?

Need help identifying caps.

June 15, 2018, 8:35 am

≫ Next: Rgh and Jtag shuts down after trying to copy files from X360HDD to labtop

≪ Previous: Matrix Glitcher V3 xsvf execution error code 01, half bricked?

$

0

0

Hi, been lurking for a while, learning how to repair a Jasper board I picked up. I have accidentally knocked off two surface mount capacitors from the underside of the board. Is there anyone who may know the values of the caps from location C6U1 and C6U2.

I was putting the system back together and slipped, so dissapointing.

Thanks is advance.

Rgh and Jtag shuts down after trying to copy files from X360HDD to labtop

June 15, 2018, 9:37 am

≫ Next: TFTP: packet send error and no answer from server - XELL reoladed

≪ Previous: Need help identifying caps.

$

0

0

Greetings...

I do not know how many of you still deal with the old Jtag and Rgh but I am stumped. I was trying to copy a backup of my buddies 360jtagfalconhdd to my labtop. I use 360 content manager to see the HDD on windows 7 since it will not work on windows 10.When i hit copy after about 1 minute my xbox shuts down. Thinking this was just a freestyledash issue i put his hdd on my rgh and surprisingly after it shut down as well ?

I heard there was a way to Ftp or use network...

Rgh and Jtag shuts down after trying to copy files from X360HDD to labtop

TFTP: packet send error and no answer from server - XELL reoladed

June 15, 2018, 10:43 am

≫ Next: RGH doesn’t glitch and boot anymore?

≪ Previous: Rgh and Jtag shuts down after trying to copy files from X360HDD to labtop

$

0

0

I was trying to install mupen64 but when I start XELL (booting through eject button), it gets stuck, reading the errors "TFTP: packet send error" and "TFTP: no answer from server"... I currently have mupen64 and xell on an usb. Any idea of what am I doing wrong? Oh and my console is a jtag/rgh

Thanks in advance