rgh 1.2/ jrunner not working

September 20, 2018, 9:28 am

≫ Next: JR Programmer v2 cannot be seen by Windows or J-Runner

≪ Previous: Trinity With Ace V3 (no debug led->Green light) FT4R2 trace broken?

$

0

0

hello all!
so I had a problem while Modding a 360 (jasper BB) I have an official nand-x and a coolrunner rev-c. (I have a bit of experience with RGH as I have done a few consoles in the past).so basically I had everything going well, I unsoldered the nand x wires from the xbox and booted my console up. it booted into xell fine and I got my CPU/dvd key.I put the nand x wires back onto the console and tried writing to the nand, however I got a message from jrunner saying something like "cannot...

rgh 1.2/ jrunner not working

---

JR Programmer v2 cannot be seen by Windows or J-Runner

September 20, 2018, 4:14 pm

≫ Next: X360ACE-V4 new RGH chip for Corona(8 wires C1 C2) / Trinity(8/7 wires C1 C2)

≪ Previous: rgh 1.2/ jrunner not working

$

0

0

Hey there,

I've been trying all I can to get this JR Programmer to work. I've read multiple threads and nothing has worked.
I thought I should reflash it but J-Runner will refuse to see it and in the Device Manager it comes up as "USB Input Device".

I've tried reinstalling the drivers but according to windows I have the best drivers at the moment and won't let me reinstall them.

Loading the JRP in Boot...

JR Programmer v2 cannot be seen by Windows or J-Runner

X360ACE-V4 new RGH chip for Corona(8 wires C1 C2) / Trinity(8/7 wires C1 C2)

September 21, 2018, 12:17 am

≫ Next: Xbox 360 Neighborhood Won't Open

≪ Previous: JR Programmer v2 cannot be seen by Windows or J-Runner

$

0

0

It seems the team behind X360ACE has released a new version of the chip marked as V4.
I guess it would be a new technology for reliable instant booting using extra C1 C2 points?
Otherwise there's no point to solder more wires compared to the already very good 6 wires V3 cafe version.
Also it's 3.3V instead of the 5V on the V3.

Corona


Trinity P1 P2...

X360ACE-V4 new RGH chip for Corona(8 wires C1 C2) / Trinity(8/7 wires C1 C2)

Xbox 360 Neighborhood Won't Open

September 21, 2018, 7:50 am

≫ Next: Tried to RGH my Trinity, failed. Reverted to stock, boots but now red lights after a few mins

≪ Previous: X360ACE-V4 new RGH chip for Corona(8 wires C1 C2) / Trinity(8/7 wires C1 C2)

$

0

0

I got an RGH a few months ago and I have a halo trainer (Halo Astro 2) but last night I needed to reset my PC but I backed up all my files. I installed Xbox 360 Neighborhood but it doesn't want to open for some reason. I've tried downloading it again but it just doesn't close. This is not an Xbox issue. It's neighborhood. Can anyone help? Thanks

Tried to RGH my Trinity, failed. Reverted to stock, boots but now red lights after a few mins

September 21, 2018, 8:00 am

≫ Next: I went and bought 2 Ace V3s and 2 Ace v4s for a phat

≪ Previous: Xbox 360 Neighborhood Won't Open

$

0

0

So I tried to RGH my Trinity (with a real Ace v3 and JR prog v2), I made it to Xell, got the serial number, then re-wrote the NAND after doing XeBuild. Then I got the dreaded red light. I tried reflashing one more time, and it booted into the stock dashboard, but quickly got a red light.

So I flashed back to stock and de-soldered everything (both NAND wires and Ace V3). Now it boots into the dash, but gets a red light after a few mins. I can get into a game sometimes, but then get a red...

Tried to RGH my Trinity, failed. Reverted to stock, boots but now red lights after a few mins

I went and bought 2 Ace V3s and 2 Ace v4s for a phat

September 21, 2018, 9:33 am

≫ Next: View Xbox 360 iso without extracting

≪ Previous: Tried to RGH my Trinity, failed. Reverted to stock, boots but now red lights after a few mins

$

0

0

Can I have a installation diagram for what you all the experts thing is easier using. I have ace v3s and ace v4s for this phat because im a total idiot and didnt buy enough coolrunners and couldn't cancel the order on weekend modder. I'm doing 5 consoles in a week and needed enough chips to do it. I need you alls advice on what i should do in this situation I only have 3 coolrunners and 2 ace v3s and 2 ace v4s. I have 4 phats and a slim to do

View Xbox 360 iso without extracting

September 18, 2018, 6:16 am

≫ Next: (RGH) Help with games

≪ Previous: I went and bought 2 Ace V3s and 2 Ace v4s for a phat

$

0

0

Hello, is it possible to check the iso content without extracting? I

(RGH) Help with games

September 21, 2018, 12:27 pm

≫ Next: xex menu crashes

≪ Previous: View Xbox 360 iso without extracting

$

0

0

hello guys! I need help with my RGH,When i play mw2 and go online it fatal crashes and I have no clue why. It says bo2 is incompatable when I try launch it. And mw3 doesn’t work either I can’t press any game modes and when I start a private match players just disconnect when the game starts! If someone could help it be appreciated!

---

xex menu crashes

September 21, 2018, 2:32 pm

≫ Next: Rgh 360 banned

≪ Previous: (RGH) Help with games

$

0

0

as soon as i start up xex menu fatal crash intercepted keeps popping up

Rgh 360 banned

September 21, 2018, 5:26 pm

≫ Next: Messed up ft6u1 point and can't solder to the trace (RGH1.2)

≪ Previous: xex menu crashes

$

0

0

So I've bought 2 kvs already. Both validated. Both unbanned. Cleared my system cache 3 times and rebooted. Swapped them out and everything doing everything right making sure they're in the right place and all. I have my stealth server set plugins set network plugs in dashlaunch set. And I'm still console banned.... after each kv swap the xbox wouldn't reboot when it was supposed to. This is my first rgh I'm kinda mad cuz I've gone thru literally 8 different support chats and all have said...

Rgh 360 banned

Messed up ft6u1 point and can't solder to the trace (RGH1.2)

September 22, 2018, 4:01 am

≫ Next: RGH Xbox 360 has weird problems

≪ Previous: Rgh 360 banned

$

0

0

The point is brown/black (is this what "pulling a pad" means?). There's a tiny glint of metal on the point but I don't think it's enough for a good connection and every time I try to solder to it, the wire comes out with a small tug. I've tried scrapping the trace behind it but I can't get the solder to bind to it.

Is there an alternate point to ft6u1 other than the traces?

I might just do RGH 2 since that uses ft6u7 but I'm just wondering if ft6u1 is broken beyond repair....

Messed up ft6u1 point and can't solder to the trace (RGH1.2)

RGH Xbox 360 has weird problems

September 22, 2018, 7:03 am

≫ Next: Xbox rgh won't connect to xbox live

≪ Previous: Messed up ft6u1 point and can't solder to the trace (RGH1.2)

$

0

0

Hi guys I'm new on the forum. Glad to be a member finally for years I've been finding answers to most my questions here via google search...
I've had my rgh console for 4 years now and suddenly I've lost all my save games (unless I boot games through default dash) its still very irritating though..
My biggest problem is that my right analog button doesn't work... so I cant use special abilities in gta 5 and I cant drag bodies in far cry 4 so basically I get stuck on certain missions...

RGH Xbox 360 has weird problems

Xbox rgh won't connect to xbox live

September 22, 2018, 8:40 am

≫ Next: Coolrunner no power on boot, works when attached to PC

≪ Previous: RGH Xbox 360 has weird problems

$

0

0

So I bought a xbox rgh and started to set it up I watched a few YouTube tutorials and followed the steps correctly and also asked the guy I bought it from for assistance he tried to do his best at helping me but he doesn't know either why it won't connect to xbl, I'm running Ninja stealth server I have redeem a token and set up the plugins right but when I test for xbox live it says failed with it saying port forward the xbox ports and I did that and tried again yet it doesn't connect. I...

Xbox rgh won't connect to xbox live

Coolrunner no power on boot, works when attached to PC

September 22, 2018, 8:54 am

≫ Next: My JR Programmer V2 won’t work

≪ Previous: Xbox rgh won't connect to xbox live

$

0

0

So I'm working on an RGH 1.2 install for a Phat Jasper 360
I'm using a CoolRunner Rev C clone and I've tested by booting into Xell.
I unhook the J Runner from the CoolRunner and I get nothing though.
The Xbox 360 power light flashes, fan comes on, but there's no LED on the CoolRunner.
Currently I'm using the alternate clock point, but all others are the "standard" points.
I've checked all my connections (the system points have to be good, right?) and tested the 3.3v and GND points with a...

Coolrunner no power on boot, works when attached to PC

My JR Programmer V2 won’t work

September 23, 2018, 6:58 am

≫ Next: Why is my media ID 00000000?

≪ Previous: Coolrunner no power on boot, works when attached to PC

$

0

0

my JR programmer isn’t in bootloader mode drivers are installed and it comes up as a usb input device and it’s pissing me off. How do I fix this. It won’t even let me write a firmware to it

---

Why is my media ID 00000000?

September 23, 2018, 8:49 am

≫ Next: Error trying to update Xbox 360 with lt+3.0

≪ Previous: My JR Programmer V2 won’t work

$

0

0

Trying to download some DLC for cod 2 but when I look up my Media ID on freestyle dash it shows 00000000 so I cant get the correct title update . I've never had a problem using this method before with fsd, what's going on here? The game is downloaded from a trusted site but maybe that's what it could be? I really don't want to find another file to get as this game already comes in xex format (as I really don't like using jdownloader and don't even have it installed). Id rather...

Why is my media ID 00000000?

Error trying to update Xbox 360 with lt+3.0

September 23, 2018, 9:33 am

≫ Next: Jasper BB boots xell but e79 or e71 on dash boot

≪ Previous: Why is my media ID 00000000?

$

0

0

Hello
Some time ago they put my Xbox 360 LT + 3.0, and it worked fine but when trying to play Watchdog and Assassins Creed Rogue It asked for an update, I tried to update but I throw error, when I try to update by game disc, and when I try to update by usb.
The error that throws me is 3F4B 4099 1801 0300 c800 0036 with CD update
The error that throws me with the USB is similar ending in C800 0036
The version of my Dashboard is 2.0.16203.0
How could I solve my problem? He tried many things...

Error trying to update Xbox 360 with lt+3.0

Jasper BB boots xell but e79 or e71 on dash boot

September 23, 2018, 1:15 pm

≫ Next: Need some help

≪ Previous: Error trying to update Xbox 360 with lt+3.0

$

0

0

Hi all so i have used the same chip(CR Rev C) and wire routing same install on about 5-10 consoles including my own personal console and have had no issues.
Untill i modded this jasper BB/512, The install went fine booted to xell got my cpu key etc, made a updflash.bin(with a bad block but jrunner remapped it) file flashed it to the console booted up and it worked fine for a few days. I then loaded dl,fsd(With the dream theme 2.5),xexmenu etc set fsd to load on boot. I then started messing...

Jasper BB boots xell but e79 or e71 on dash boot

Need some help

September 23, 2018, 1:51 pm

≫ Next: J-Runner Win32 Error

≪ Previous: Jasper BB boots xell but e79 or e71 on dash boot

$

0

0

Dear,

recently we got xbox 360 slim which is moded. We can download iso file and just burn the game on dual layer. I dont know is this xbox jtag or rgh?
Also is it possible to copy games to internal xbox disk and play games withot disk?

Thank u

J-Runner Win32 Error

September 23, 2018, 8:34 pm

≫ Next: JTAG (Corona 2.0) Slim Help

≪ Previous: Need some help

$

0

0

So J-runner has been working perfectly, I've modded a couple Xbox's so far but now I'm getting this win32 error:No more bytes!, I've tried using a different USB port, Different Computer, and on Windows 7 (I'm running Windows 10) I've had no luck so far. This happens when Reading the NAND, checking the console type. I'll upload a picture of J-runner. Hopefully, my JR-Programmer isn't dying, cause nowhere in New Zealand sells these.