Very interesting problem. I think my Super Nand Flasher went out while flashing the origional.bin. After I flashed the origional.bin to my xbox 360, I got an red light. Secondary error code is 0032.
I can not read or write to the nand only Erase? Never had this happen before.
I got a new flasher on the way, but would a bad flash cause an 0032 error?
When reading J2C1 & J2C3 I get the following read outs
Black 0.05v Should be 1v
Red 0.05v Should be 1v
Brown 3.2v - Normal
Orange 43 ohnm...
I Can Only Erase Nand But Not Read or Write?
I can not read or write to the nand only Erase? Never had this happen before.
I got a new flasher on the way, but would a bad flash cause an 0032 error?
When reading J2C1 & J2C3 I get the following read outs
Black 0.05v Should be 1v
Red 0.05v Should be 1v
Brown 3.2v - Normal
Orange 43 ohnm...
I Can Only Erase Nand But Not Read or Write?