I'm currently in the process of attempting an RGH 1.2 install into a Falcon. I read the nand, installed the Coolrunner, and programmed it with a series of timing files. I can't get it to boot into Xell to get the CPU key. The most recent step I had taken was to create and write the ECC. When I went to boot the console into Xell so I could find the CPU key it wouldn't glitch. The green light doesn't have a very regular pattern. Before it would be solid and then flash a bit when it tried to...
Falcon RGH 1.2 not booting into Xell
Falcon RGH 1.2 not booting into Xell