Read the nand on it, was successful other than two unreadable blocks but that was alright, everything went well until I tried to start it up. The fans came on but no boot. Checked my wiring and attempted rgh2+ wiring and then it wouldnt even start. My talismoon fans' leds came on for a split second and then nothing, although the green cr4 xl light did come on and off about 5 times.
After enough soldering to the point, STBY_CLK's pad lifted, forcing me to do a trace repair that looks...
Falcon won't boot at all - CR4 XL - R-JTAG+
After enough soldering to the point, STBY_CLK's pad lifted, forcing me to do a trace repair that looks...
Falcon won't boot at all - CR4 XL - R-JTAG+